How To Properly Clean A Mechanical Keyboard

Your Element gaming keyboard tin can stand up to the virtually intense gaming sessions, merely it notwithstanding needs some dearest in the form of a thorough cleaning from time to time.

Here are a few like shooting fish in a barrel steps to go on your PC gaming setup make clean and requite your mechanical keyboard the solid lifespan every good peripheral deserves:

1. Unplug your keyboard and turn it upside downwards to shake out any crumbs or dirt.
2. Using a handheld vacuum or the hose attachment of your upright vacuum with a brush head, remove grit from your keyboard plate. Slide across and cover the spaces between keys. Be gentle and avert harm from pushing the tube hard into your keyboard.
3. If trying to disinfect or remove stains, dampen a microfiber cloth (you can dilute a piffling isopropyl booze with water) and gently wipe down the entire keyboard. Using a disposable wipe is okay, besides, but don't employ harsh cleansers and never spray a cleaning solution straight on the keyboard. Wipe the cloth across the peak of the keyboard, in betwixt keys and along each side of the frame.
4. Using some other clean and dry cloth, wipe away any remaining moisture.
5. This damp cloth method works well to make clean your keyboard wrist rest and your gaming mouse pad , besides.

For a deeper clean (recommended every 1-ii months for optimal performance) or to tackle pasty keys:

1. Unplug the keyboard. Using the keycap removal tool included in your Chemical element box, remove all small keycaps. For the larger keycaps, you tin can use the keycap removal tool, but take extra care to remove the keycap from the stabilizer – use both easily to stabilize the cardinal and pull the central off the stabilizer machinery as perpendicular to the keyboard surface as possible.
2. Place all keycaps into a container of warm water and dish soap, letting them soak for several hours.
3. Once keycaps are removed, clean the keyboard frame using a vacuum with the castor zipper or compressed air to remove any grit, dirt, droppings, hair, etc. Use a damp cloth or cotton wool swab to carefully clean around the mechanical keyboard switches.
4. Wipe with a clean, dry cloth and permit the keyboard frame dry completely. Remove keycaps from water and dry thoroughly with a clean textile.
5. Supplant the keycaps using the diagram beneath for reference. Marshal the correct keys and button down onto the keycap to seat it firmly into the mechanical switch. Same goes for the larger keycaps with stabilizers – use multiple fingers to button the keycap down into the stabilizer firmly.

If y'all're cleaning upwards subsequently a spill:

1. Unplug immediately.
2. Turn upside down in a cool, dry out identify and let it dry out completely. This could have up to ii days. Don't blitz it. If the hardware is even so wet in one case plugged back in, its chances of recovery are low. The same goes for any other PC gaming accessories in your setup.
3. If needed, proceed to the deep clean steps above to fully remove whatever viscid residue from the spill. Once dried out, plug dorsum in and cross your fingers.

For an endless supply of keyboard cleaning and maintenance tips, bank check out this Reddit mechanical keyboard guide .

---

Share this post

---

---

Dorsum to Guides

Source: https://www.whirlwindfx.com/blogs/guides/how-to-clean-a-mechanical-keyboard

Posted by: richardsonserot1971.blogspot.com

Share this post