How Do I Clean My Cricut Cutting Mat

Download Article

Download Article

Cricut mats are sticky mats that are used in Cricut machines. These mats are meant to last for 25-40 uses, but cleaning them can extend their life. To clean your mat and rejuvenate its stickiness, you tin can do light cleaning frequently and deeper cleaning when the mat has gotten excessively dirty.^[1] After cleaning no longer makes the mat sticky once more, there are also ways to add a new layer of stickiness.

1. 1

   Give your mat a calorie-free cleaning when it loses some of its stickiness. In gild to go along your mat glutinous for every bit long as possible, it's a expert idea to make clean it regularly. First scrape it off with a plastic scraper, either Cricut brand or any other type of hard plastic scraper. And then wipe an alcohol-free infant wipe or roll a lint roller over the surface.^[2]

   • A lint roller is usually stickier than the mat, then it's able to remove any droppings that is stuck to the mat.
   • The infant wipes are able to gently moisture downwards the surface and remove droppings without damaging the mat.

2. 2

   Rub the surface with soap and water. If you have used your mat repeatedly and it is actually lacking stickiness, the surface may need a light scrub. Put a pocket-sized corporeality of dish soap and warm h2o over the surface and scrub it lightly with a soft castor. And then rinse the surface off with warm water.^[3]

   • If you desire to utilize a sponge on the surface, endeavour a Magic Eraser. This type of sponge will be gentle enough on the surface and information technology is good at removing balance.

   Advertisement

3. 3

   Spray a degreaser on the mat. If your mat is very muddy and has no stickiness left, y'all will need to use a stronger cleaner. Degreasers volition cut through any is on the surface and remove it. Nonetheless, they can leave a residual, so the mat needs to be cleaned with soap and water later using a degreaser.

   • Using a strong degreaser may diminish the stickiness of the mat. However, y'all can replenish the stickiness after it is clean and dry.

4. 4

   Let the mat air dry out. Once clean, put the mat on a drying rack or hang it upward so that both sides of information technology are able to dry completely. Whatever type of cleaning you practise, information technology's important to let the mat dry out earlier using it in the machine again.

   • Any remaining moisture will minimize its stickiness and could impairment the machine.
   • Do not use a towel to dry the mat. Rubbing a towel over the gummy surface volition cover it with fibers, minimizing its effectiveness.

   Advertizement

1. ane

   Remove all frosting, fondant, or gum paste. There are some Cricut machines that are made specifically to cut decorative pieces out of mucilage paste, frosting sheets, and fondant. In one case the decorative pieces have been cut and pulled off the mat, yous volition need to remove all excess glue paste, frosting, or fondant by pulling it off the mat with your fingers.

   • In some cases, the excess tin exist reconstituted and reused.

2. 2

   Scrape off excess shortening with a plastic scraper. The decorative food sheets cut with these special Cricut machines are held on to the cutting mat with a thick layer of shortening, not a sticky mat. Once you are washed cutting a sail, scrape as much of this shortening off as possible.

   • Cricut sells plastic scrapers that can exist used on their mats. However, any pocket-sized plastic scraper, such as those sold for cleaning dishes, volition work.

3. 3

   Utilize warm soapy water to clean the mat. In one case you cover the mat in dish lather and warm h2o, scrub it to remove the backlog shortening. You may need to scrub the surface of the mat a bit with a normal dish sponge or brush to remove any excess shortening.

   • Yous should only use cleaners on it that are not-toxic and safe for contact with kitchen equipment, so using warm water and dish lather works well on these mats.

4. 4

   Let the mat air dry out. Like all other Cricut mats, the Cricut Cake mats should be left out to dry subsequently they are washed. Once completely dry out, they can be used again in your machine.

   • Don't use a towel to dry your mat. This can exit fibers on the surface of the mat, which volition be transferred to the frosting, fondant, or gum paste y'all cut.

   Advertizement

1. i

   Remove the original sticky layer with rubbing alcohol or stickiness remover. To get new adhesive to stick to your mat, it's a practiced idea to remove the layer that has lost its stickiness. You tin practice this by covering the surface with rubbing alcohol or a stickiness removing product, such every bit Goo Gone.^[iv]

   • Y'all may need to use a scrapper, such as the ane included in the Cricut tools pack, to become the old surface to come off.

2. 2

   Tape off the edges of the mat. The edges of a Cricut mat need to be free of stickiness, every bit this is the part of the mat that is pulled through the machine's rollers. To ensure that you don't become any adhesive on these areas, you should record them off with painter's tape or masking record.

   • The area that you lot need to record off is clearly marked on the mat with color. The colored areas are on all 4 edges exterior of the filigree pattern.

3. iii

   Cover the surface with a repositionable adhesive. There are a diverseness of adhesive products that people use to rejuvenate their mats. They are bachelor at arts and crafts stores and from online retailers. Some can be sprayed over the surface and some demand to be brushed on, only all should be applied in two-3 coats. Some adhesives that work well include:

   • Repositionable scrapbooking glue
   • Repositionable glue sticks
   • Quilt basting spray
   • Tacky glue thinned out with an equal role of water
   • Repositionable spray adhesive

4. 4

   Let the adhesive dry thoroughly. This volition ensure that the adhesive is bonded to the mat properly and that it doesn't stick too much to the paper you lot are cutting. In one case the mat is dry, remove the tape and use the mat.

   Advertisement

Add together New Question

• Question

  How exercise I get fuzz off my Cricut mat?

  

  Sarah Stearns is a DIY Specialist, Artist, Maker, Blogger, and the Founder of SarahMaker.com. With over 10 years of experience, she specializes in fun, approachable crafts like crocheting, making polymer dirt jewelry, quilting, and creating Cricut projects. Her work has been featured in several publications, such as Scientific American, Good Housekeeping, Vox, and Apartment Therapy. Sarah holds a BA in Psychology from Vanderbilt University.

  

  DIY Specialist

  Expert Answer

  Use a scraper tool or lint roller to go rid of any fuzz stuck to your Cricut mat.

• Question

  Do I need to clean my Cricut mat?

  

  Sarah Stearns is a DIY Specialist, Artist, Maker, Blogger, and the Founder of SarahMaker.com. With over 10 years of experience, she specializes in fun, approachable crafts like crocheting, making polymer clay jewelry, quilting, and creating Cricut projects. Her piece of work has been featured in several publications, such as Scientific American, Good Housekeeping, Phonation, and Apartment Therapy. Sarah holds a BA in Psychology from Vanderbilt University.

  

  DIY Specialist

  Expert Reply

  Peradventure! You should attempt cleaning your Cricut mat when it starts getting muddy and losing its stickiness.

Ask a Question

200 characters left

Include your email address to go a bulletin when this question is answered.

Submit

Advertisement

Things You'll Demand

• Plastic scraper
• Alcohol-free baby wipe
• Lint roller
• Dish soap
• Magic eraser
• Degreaser

• Plastic scraper
• Dish soap
• Sponge
• Dish brush

• Rubbing alcohol
• Stickiness remover
• Plastic scraper
• Painter's tape or masking record
• Repositionable adhesive

• Be aware that adding stickiness to your Cricut mats may void whatever warranties that the Cricut machine comes with. In most cases, your car is warrantied for 1 yr from the date of purchase.

Advertisement

Near This Article

Article Summary X

To lightly clean a cricut mat, start past scraping any dirt off with a plastic scraper. And then, wipe an alcohol-gratuitous baby wipe or roll a lint roller over it to remove any droppings stuck to the surface. If yous utilise the mat repeatedly and information technology's lacking stickiness, put a small corporeality of dish soap and warm water over the surface, and scrub it lightly with a soft brush. For a mat that is very muddy and has lost all stickiness, spray a degreaser on it to cut through the crud, and then clean it well with soap and water. Once clean, dry out the mat by hanging it up or placing information technology on a drying rack. To larn how to clean cricut cake mats, keep reading!

Did this summary help you?

Cheers to all authors for creating a page that has been read 137,801 times.

Did this commodity help you?

Source: https://www.wikihow.com/Clean-a-Cricut-Mat

Posted by: richardsonserot1971.blogspot.com

Share this post